Biostar 945P-A7A Owner's Manual download pdf (Page 72)

945P-A7A BIOS Manual

This item allows you to enable or disable the primary/ secondary IDE Channel.

The Choices: Enabled (default), Disabled.

IDE Primary/Secondary/Master/Slave UDMA

Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard

drives in your system. As well, your operating environment requires a DMA driver

(Windows 95 OSR2 or a third party IDE bus master driver). If your hard drive and

your system software both support Ultra DMA/100, select Auto to enable BIOS

support.

The Choices: Auto (default), Disabled.

SATA Mode

his item allows you to choose SATA Mode.

The Choices: IDE (default),RAID,AHCI.

On-Chip Serial ATA

This item allows you to choose:

Disabled: disabled SATA Controller

Combined Mode: PATA and SATA are combined max of 2 IDE drivers

in each channel.

Enhanced Mode: enabled both SATA and PATA max of 6 IDE drivers

are supported.

SATA Only: SATA is operating in legacy mode.

The Choices: Default (default), Auto, Combined Mode, Enhanced Mode,

and SATA only.

SATA PORT Speed Settings

This item allows you to set SATA PORT Speed.

The Choices: Disabled (default),Force GEN I, Force GEN II.

PATA IDE Mode

This item allows you to choose PATA IDE Mode.

The Choices: Primary (default), Secondary.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 87 88

No comments

Biostar 945P-A7A Owner's Manual Page 72