Biostar M7NCG Pro Owner's Manual download pdf (Page 12)

Power Source Selection for USB: JUSBV1/ JUSBV2/ JUSBV4

JUSBV1/JUSBV2/

JUSBV4

Assignment Description

1 3

Pin 1-2 close

+5V

JUSBV1: 5V for JUSB1 port

JUSBV2: 5V for JUSBLAN1 port

JUSBV4: 5V for JUSB2 port

1 3

Pin 2-3 close

+5V Standby

Voltage

JUSBV1: JUSB1 port powered with

standby voltage of 5V

JUSBV2: JUSBLAN1 port powered wit

standby voltage of 5V

JUSBV4: JUSB2 port powered with

standby voltage of 5V

Note: In order to power-on USB devices function, “JUSBV1/JUSBV2/

JUSBV4” jumper cap should be placed on pin 2-3 respectively.

Clear CMOS Jumper: JCMOS

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 Close”.

JCMOS Assignment

Pin 1-2 Close

Normal Operation (default)

Pin 2-3 Close

Clear CMOS Data

The followin

rocedures are for resettin

the

BIOS

assword. It is im

ortant to follow these

instructions closely.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 74 75

No comments

Biostar M7NCG Pro Owner's Manual Page 12