Biostar K8NHA Grand Owner's Manual download pdf (Page 50)

5 Integrated Peripherals

 Figure 5. Integrated Peripherals

IDE Func tion Setup

If you highlight the literal “Press Enter” next to the “IDE Function Setup” label and then press

the enter key, it will take you a submenu with the following options:

OnChip IDE Channel 0/1

The motherboard chipset contains a PCI IDE interface with support for

two IDE channels. Select “Enabled” to activate the first and/or second IDE

interface. Select “Disabled” to deactivate an interface if you are going to install a

primary and/or secondary add-in IDE interface.

The Ch o i ce s : En a b le d (default), Disabled.

Primary / Secondary /Master / Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO

mode (0-4) for each of the IDE devices that the onboard IDE interface

supports. Modes 0 to 4 will increased performance progressively. In Auto mode,

the system automatically determines the best mode for each device.

The Cho ices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

Primary / Secondary /Master / Slave UDMA

Ultra DMA/100 functionality can be implemented if it is supported by the IDE

hard drives in your system. As well, your operating environment requires a DMA

driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 62 63

No comments

Biostar K8NHA Grand Owner's Manual Page 50