Biostar M7NCG Pro Owner's Manual download pdf (Page 64)

M7NCG Pro BIOS Setup

5 Integrated Peripherals

 Figure 5. Integrated Peripherals

IDE Func tion Setup

The chipset contains a PCI IDE interface with support for two IDE channels.

Select “Enabled” to activate the first and / or second IDE interface. If you install a primary

and / or secondary add-in IDE interface, select “Disabled” to deactivate an interface. If you

high light the litera l “P ress Enter” next to the “Onchip IDE Control” labe l and then press the

enter key, it will take you a submenu with the following options:

OnChip IDE Channel 0/1

The motherboard chipset contains a PCI IDE interface with support for

two IDE channels. Select “Enabled” to activate the first and/or second IDE

interface. Select “Disabled” to deactivate an interface if you are going to install a

primary and/or secondary add-in IDE interface.

The Choices: Enabled (default), Disabled.

Primary / Secondary Master / Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4)

for each of the IDE devices that the onboard IDE interface supports. Modes 0

through 4 provides successively increased performance. In Auto mode, the

system automatically determines the best mode for each device.

The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 74 75

No comments

Biostar M7NCG Pro Owner's Manual Page 64