Biostar TForce 6100-939 Owner's Manual download pdf (Page 43)

Biostar T-Series TForce 6100-939

User’s Manual

B. CPU Overheated

If the system shuts down automatically after power on of

system for a few seconds that means the CPU protection

function has been activated.

When the CPU is overheated, the motherboard will shutdown

automatically to avoid damaging the CPU, and the system will

not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU

surface.

2. CPU fan is rotating normally.

3. CPU fan speed is fulfilling the CPU speed.

After confirmation, please follow the steps below to relieve the

CPU protection function.

1. Remove the power cord from power supply for a few

seconds.

2. Wait for a few seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “JCMOS1: Clear CMOS Header” section)

2. Wait for a few seconds.

3. Power on the system again.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 96 97

No comments

Biostar TForce 6100-939 Owner's Manual Page 43