Biostar TForce 6100-939 Owner's Manual download pdf (Page 44)

Biostar T-Series TForce 6100-939

User’s Manual

42

4.4 TROUBLESHOOTING

Problem Solution

1. No power to the system at

all Power light don’t

illuminate, fan inside power

supply does not turn on.

2. Indicator light on keyboard

does not turn on.

1. Make sure power cable is

securely plugged in.

2. Replace cable.

3. Contact technical support.

System inoperative.

Keyboard lights are on,

power indicator lights are lit,

and hard drive is spinning.

Using even pressure on both

ends of the DIMM, press

down firmly until the module

snaps into place.

System does not boot from

hard disk drive, can be

booted from optical drive.

1. Check cable running from

disk to disk controller board.

Make sure both ends are

securely plugged in; check

the drive type in the standard

CMOS setup.

2. Backing up the hard drive is

extremely important. All hard

disks are capable of breaking

down at any time.

System only boots from

optical drive. Hard disk can

be read and applications

can be used but booting

from hard disk is

impossible.

1. Back up data and application

files.

2. Reformat the hard drive.

Re-install applications and

data using backup disks.

Screen message says

“Invalid Configuration” or

“CMOS Failure.”

Review system’s equipment.

Make sure correct information

is in setup.

Cannot boot system after

installing second hard

drive.

1. Set master/slave jumpers

correctly.

2. Run SETUP program and

select correct drive types. Call

the drive manufacturers for

compatibility with other drives.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 96 97

Comments to this Manuals

No comments