Biostar P4TPT Owner's Manual download pdf (Page 14)

1414

EnglishEnglish

English

1 3

(7) Front USB Header: JUSB2/ JUSB3 (Optional)

The motherboard provides two USB 2.0 Pin Header. USB 2.0 technology

increases Data transfer rate up to a maximum throughput of 480 Mbps, which

is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB

interface peripherals such as USB HDD, digital cameras, MP3 players, printers,

modems, etc.

Pin Assignment Pin Assignment

1 +5V 2 +5V

3 USBN- 4 USBN-

5 USBP+ 6 USBP+

7 Ground 8 Ground

9 KEY 10 NA

(8) Power Source Selection for USB: JUSBV1/JUSBV2_3 (Optional)

JUSBV1/JUSBV2_3 Assignment Description

Pin 1-2 close +5V JUSBV1: 5V for USB at the

JUSB1 port connector.

JUSBV2_3: 5V for USB at the JUSB2/

JUSB3 port connector.

Pin 2-3 close +5V Standby Voltage JUSBV1: +5V Standby Voltage for USB

at the JUSB1 port connector.

JUSBV2_3: +5V Standby Voltage for

USB at the JUSB2/JUSB3 port

connector.

Note: In order to power-on USB devices function, "JUSBV1/

JUSBV2_3" jumper cap should be placed on pin 2-3 respectively.

(9) Wake On LAN Header: JWOL1 (Optional)

This connector allows you to connect to a LAN card with Wake On LAN

function. You can wake up the computer by remote control through a local area

network.

JWOL1

Pin Assignment

1 +3.3V Standby Voltage

2 Ground

3 Wake up

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 56 57

No comments

Biostar P4TPT Owner's Manual Page 14